KBS Restoration Center | Application Guides

How to Clear Coat Taxidermy with DiamondFinish Clear

Posted by KBS Coatings on 5/8/2026 to Tips and Tricks

Learn how to clear coat taxidermy with DiamondFinish Clear using an airbrush or spray gun. Crystal clear, durable, UV-resistant protection for mounts.

How to Apply Bedliner to Your Jeep Floor: Prep, Seal, and Protect

Posted by KBS Coatings on 5/7/2026 to Tips and Tricks

Step-by-step guide: remove carpet, treat rust, and apply KBS Bed Liner to your Jeep floor for a durable, waterproof interior that holds up to real-world use.

How to Fix a Rusting Truck Frame (And Stop It for Good)

Posted by KBS Coatings on 5/4/2026 to Tips and Tricks

That flaking paint on your truck frame isn't just ugly — it means the rust underneath is spreading. Here's why spray paint always fails on frames, and the three-step system that actually stops it.

How to Fix Rust on a Truck Frame and Stop Rust for Good

Posted by KBS Coatings on 4/22/2026 to Tips and Tricks

Learn how to fix rust on a truck frame step by step. Remove corrosion, prep metal, and apply coatings to stop rust and protect your frame long term.

How to Fix a Rough, Faded, or Oxidized Water Slide - Restore Speed and Performance

Posted by KBS Coatings on 4/9/2026 to Tips and Tricks

A rough-feeling water slide is usually caused by fading, oxidation, and surface wear breaking down the original gelcoat, creating drag and slowing riders. Restoring a smooth, high-performance surface requires proper cleaning, preparation, and

How to Paint a Motorcycle Engine So It Doesn't Peel, Flake, or Burn Off

Posted by KBS Coatings on 3/25/2026 to Tips and Tricks

Get a durable, professional finish that won’t peel, flake, or burn off. This step-by-step guide shows how to properly clean, prep, and paint a motorcycle engine using the KBS Motor Coater Kit.

How to Paint an Axle Housing the Right Way - Prevent Rust and Peeling

Posted by KBS Coatings on 3/11/2026 to Tips and Tricks

Rusty axle housing or peeling paint? Learn how to properly refinish an axle housing to stop rust and prevent paint chipping and peeling. This how-to guide covers cleaning, rust treatment, and coating for durable, long-lasting protection.

How to Repair & Stop Car Floor Pan Rust | The Ultimate DIY Guide

Posted by KBS Coatings on 2/25/2026 to Tips and Tricks

Don't let floorboard rust ruin your classic car. Learn how to identify, repair, and permanently stop rust in your car's floor pan using the professional KBS 3-step system. Covers surface rust, structural rot, and when to weld vs. use epoxy putty.

How to Seal a Metal Fuel Tank Inside and Out to Stop Rust and Extend Its Life

Posted by KBS Coatings on 2/12/2026 to Tips and Tricks

Learn how to seal a metal fuel tank inside and out to stop rust, prevent fuel contamination, and extend tank life using KBS Tank Sealer Kits and RustSeal.

How to Paint Coil Springs and Leaf Springs So the Finish Doesn’t Crack or Peel

Posted by KBS Coatings on 1/28/2026 to Tips and Tricks

Prevent cracking, peeling, and rust on your suspension springs! Learn how to prep and paint coil & leaf springs using the KBS 3-Step System for a long-lasting, flexible finish. Read more→

Using RustSeal Like Glyptal to Protect Internal Engine Components

Posted by KBS Coatings on 1/26/2026 to Tips and Tricks

Did you know you can use KBS RustSeal like Glyptal to seal and protect the internal surfaces of your engine? RustSeal prevents rust, improves oil drain-back, and keeps your engine cleaner for longer. Learn how to coat your engine like the pros in our latest guide. →

How to Paint Rusty Exhaust Headers So the Finish Won’t Crack, Flake, or Peel

Posted by KBS Coatings on 1/14/2026 to Tips and Tricks

This in-depth guide explains why header paint peels and shows how proper prep, high-temperature coatings, and correct heat curing deliver a durable, long-lasting finish that won’t crack, flake, or burn off under extreme heat. →

How to Paint Aluminum Wheels Black So the Finish Lasts

Posted by KBS Coatings on 12/31/2025 to Tips and Tricks

Thinking about painting your aluminum wheels black, but worried the finish won’t last? Learn how to achieve strong paint adhesion on aluminum wheels with long-term durability against heat, brake dust, and road debris using KBS MAXX.

What’s the Most Durable Way to Seal Wood Exposed to Heavy Use and Harsh Conditions?

Posted by KBS Coatings on 12/18/2025 to Tips and Tricks

Learn why RustSeal outperforms oil or water based polyurethane sealers and epoxy sealers on heavy-use wood and see how to apply it for maximum durability. Read the full step-by-step guide.

How Do You Stop and Prevent Rust on Steel UTV Skid Plates?

Posted by KBS Coatings on 12/5/2025 to Tips and Tricks

Protect your steel UTV skid plates from rust, impacts, and harsh off-road abuse. Learn how this simple DIY system using RustSeal, Bed Liner and Bed Renu deliver long-lasting, professional-grade results.

How to Protect a Wood Shed Floor from Moisture and Wear

Posted by KBS Coatings on 11/19/2025 to Tips and Tricks

Protect your shed floor from moisture, rot, pests, and heavy wear with the right coating. This guide shows why sealing a wood shed floor matters, which products work best, and how to prep and coat the surface for long-lasting, DIY results.

How to Stop and Prevent Rust and Corrosion on Docks and Dock Railings

Posted by KBS Coatings on 11/5/2025 to Tips and Tricks

Protect your dock from costly rust damage and corrosion with this step-by-step guide. Learn how to clean, prep, seal, and finish steel and aluminum docks using KBS Klean, RustBlast, RustSeal, and KBS MAXX for lasting durability and a professional finish.

A Proper Body Repair Method That Keeps Rust from Coming Back

Posted by KBS Coatings on 10/27/2025 to Tips and Tricks

Rust can destroy even your best body repairs from the inside out. In this guide we show you a proven method to stop rust from returning.

How to Prevent Boat Trailer Rust: A Step-by-Step Guide | KBS Coatings

Posted by KBS Coatings on 10/8/2025 to Tips and Tricks

Rust not only makes your trailer look bad but can also compromise its structural integrity. This guide will show you how to stop existing rust and prevent future rust on your boat trailer using the KBS Coatings Ultimate Frame Coater Kit.

How Can I Stop Rust and Make My Old Steel Fence Look New?

Posted by KBS Coatings on 9/24/2025 to Tips and Tricks

Is rust and faded paint making your steel fence look tired? Addressing these issues now can improve its appearance and prevent costly future repairs. This guide shows how to stop rust using RustSeal or KBS Rust Converter, then finishing with BlackTop.

How to Spot Treat Undercar Rust Before Winter | Rust Converter & RustSeal Guide

Posted by KBS Coatings on 9/12/2025 to Tips and Tricks

Protect your vehicle’s underside before winter. Learn how to spot treat rust on frame rails, floor pans, and suspension parts using KBS Rust Converter and RustSeal. →

How To Properly Open a Paint Can Preventing a Stuck Lid and How To Preserve Paint In The Can

Posted by KBS Coatings on 9/9/2025 to Videos

Over the years, one of the most useful tips we give to our customers is how to properly open a paint can so it be sealed correctly. In the video, we show you how to properly open and close a paint can from KBS Coatings.

How To Seal my Plastic or Polyethylene Gas Tank

Posted by KBS Coatings on 7/22/2025 to News and Updates

For rigid plastic tanks, our tank sealer products are used to seal the inside of the rigid plastic tank protecting against fuel weeping or leaking from the tank which tends to happen over time with plastic gas tanks.

How to Clear Coat Over Rust and Preserve the Patina Look

Posted by KBS Coatings on 6/6/2025 to Tips and Tricks

Preserving the aged, weathered look of rusted metal is a growing trend in automotive restoration, industrial design, and artistic projects. To maintain that patina without letting corrosion worsen, applying a clear coat over rust is essential. In this article, we’ll explain what rust patina is, why it’s worth preserving, and how to effectively protect it using KBS Coatings DiamondFinish Clear and KBS MAXX Clear.

Do I Need to Use a Primer with High-Temperature Paint?

Posted by KBS Coatings on 3/13/2025 to Tips and Tricks

A common question that arises is: "Do I need to use a primer with high-temperature paint?" The answer primarily depends on exposure conditions. In many cases, using a high-temperature primer can enhance durability and corrosion resistance, ensuring a long-lasting finish. In this article we discuss when and how to use XTC and XTC Primer.

How to Prepare Metal for Painting Using KBS Klean and RustBlast for Superior Adhesion

Posted by KBS Coatings on 2/27/2025 to Tips and Tricks

Properly preparing metal surfaces for painting is essential to get the paint to bond and achieve a durable, professional-looking finish that doesn’t flake or peel. Here we will cover the steps to prepare metal for painting, with a focus on the use of KBS Klean and RustBlast.

How to Get Paint to Stick to Plastic: Step-by-Step Guide

Posted by KBS Coatings on 2/14/2025 to Tips and Tricks

Painting plastic surfaces can be a daunting task, often resulting in poor adhesion if not done correctly. See how KBS Klean, KBS SEP Self-Etching Primer and KBS FPP Flexible Plastics primer are used to prepare plastic for excellent adhesion of top coats.

Using Bed Liner on Rocker Panels, Doors, And Fenders for Protection

Posted by KBS Coatings on 1/24/2025 to News and Updates

Off road truck, SUV, and Jeep body panels can be damaged by rocks, tree branches and other debris. Applying KBS Bed Liner on rocker panels, doors, fenders, and other body panels is an effective way to avoid this type of damage. See how it’s done.

Garage Floor Makeover Using RustSeal and KBS MAXX

Posted by KBS Coatings on 1/21/2025 to News and Updates

Street Trucks highly recommends ordering RustSeal and KBS MAXX for any garage floor makeover. Terrific transition from old to new for the garage floor.

How to Remove Paint from Metal: A Complete Method Guide

Posted by KBS Coatings on 1/17/2025 to News and Updates

Best methods to remove paint from metal: chemical paint stripper, media blasting, sanding, and wire wheeling. Compare pros, cons, and when to use each.

Best Way to Store Paint and Coatings and Mix for Use

Posted by KBS Coatings on 11/6/2024 to News and Updates

Properly storing paints and coatings, and correctly preparing them for use, are key to an attractive and long-lasting finish. Using the right paint and coating storage techniques can help extend their shelf life and maintain quality for future use. See how it’s done.

Engine Block Sealer And Engine Block Coating

Posted by KBS Coatings on 2/7/2024 to News and Updates

Sealing the inside of an engine block addresses issues related to porosity, corrosion, and lubrication, and enhances to the overall longevity and reliability of the engine. Both KBS RustSeal and KBS Gold Standard Tank Sealer are excellent engine block sealer options. Here is how they are used.

Cold Galvanizing Compounds, Zinc-Rich Coatings, or RustSeal?

Posted by KBS Coatings on 1/31/2024 to News and Updates

The primary purpose of RustSeal, cold galvanizing compounds, and zinc rich coatings is to prevent rust. RustSeal prevents rust and corrosion in a very different way than zinc coatings. So, which is the best rust preventive coating?

How to Black Out Chrome Trim with Paint

Posted by KBS Coatings on 1/23/2024 to News and Updates

Customers ask us how to black out the chrome trim on their cars and trucks in a way that they’ll get great looking, durable, and long-lasting results. BlackTop is an ideal black out trim paint for chrome. See how it is done.

RustSeal Safety Colors for Industrial Equipment and Floor Markings

Posted by KBS Coatings on 1/22/2024 to News and Updates

Using safety colors for painting industrial equipment and floor markings is done regularly to enhance visibility, identify potential hazards, and promote workplace safety. RustSeal Safety Colors are formulated to do just that and are used to protect both indoor industrial equipment and as floor markings.

Using Nonconductive Coatings as Part of an EV Conversion

Posted by KBS Coatings on 1/9/2024 to News and Updates

Converting internal combustion engine powered vehicles to electric power is increasing in popularity. Electrical components must be mounted on non-conductive surfaces. You can make metal surfaces nonconductive with nonconductive coatings. See how RustSeal can be used as for this purpose.

How To Prepare Metal Before Body Work To Prevent Future Rust

Posted by KBS Coatings on 10/26/2023 to News and Updates

By taking the proper steps to prepare and seal or prime the metal before body work (KBS Klean, RustBlast, RustSeal), future rust and possible pop off of the body filler can be prevented.

The Best Way to Clean a Surface Before Coating or Painting

Posted by KBS Coatings on 10/17/2023 to Tips and Tricks

We always recommend using KBS Klean to clean a surface before coating or painting. We formulated KBS Klean as an alternative to solvent based cleaners and degreasers which notoriously leave a residue on the surface which can cause surface tension. KBS Klean rinses clean and does not leave a residue.

Candy Pigment and Flake Added To DiamondFinish Clear to Restore Jet Ski

Posted by KBS Coatings on 10/11/2023 to Customer Pictures

Check out what happened when a customer added metal flake and candy pigment to DiamondFinish Clear to restore a jet ski. DiamondFinish Clear is a crazy tough Clear Coat that can be applied Direct To Metal or over other coatings.

How To Paint A Concrete Floor and Seal a Concrete Floor

Posted by KBS Coatings on 9/28/2023 to News and Updates

RustSeal, KBS MAXX, KBS MAXX Clear, and DiamondFinish Clear are excellent coatings for painting concrete and sealing concrete. These coatings provide floor protection, longevity, and appearance and this will help you pick the correct coating for the specific application.

The Best Way to Refinish a Rusty Truck Frame

Posted by KBS Coatings on 8/29/2023 to News and Updates

For the ultimate and longest lasting rust protection, RustSeal is the best option after first preparing the surface with KBS Klean and RustBlast. KBS Rust Converter is a good rust preventer for use on completely rusted surfaces, but RustSeal will provide the longest lasting protection.

Rust Protection Using Clear Coat While Keeping a Rust Patina Look

Posted by KBS Coatings on 8/10/2023 to News and Updates

KBS Coatings recommends DiamondFinish Clear and KBS MAXX Clear for rust protection using clear coat while keeping a rust patina look. This article describes how to keep the patina looking good protecting the surface from continuing to rust and age.

How to Completely Seal a Rusty Fuel Tank

Posted by KBS Coatings on 7/25/2023 to News and Updates

This article describes how to completely seal a gas tank to prevent rust which is important because the rust will flake off and clog filters and injectors. The process is very simple and straight forward using the Tank Sealer Kit from KBS Coatings.

Clear Coat for Water-Based Paint and Coatings

Posted by KBS Coatings on 6/20/2023 to Tips and Tricks

DiamondFinish Clear is a clear coat that is incredible for protecting latex and as a clear coat for water-based paint and coatings of other types. This article describes all of the benefits for using DiamondFinish Clear to seal and protect surfaces painted with water-based coatings.

How to Refinish a Rusty Snowplow

Posted by KBS Coatings on 2/22/2023 to Tips and Tricks

Snowplows receive a lot of abuse during a busy season and wear and tear can take their toll. Maintaining a snowplow is much less expensive than replacing it or making significant repairs. We describe in this article how to prep and coat a rusty snowplow.

How to Detail Your Engine and Engine Bay with KBS Klean

Posted by KBS Coatings on 2/9/2023 to Tips and Tricks

A clean engine bay looks great and makes a car or truck easier to maintain. This article describes how to use KBS Klean as part of this process to detail your engine making your job so much easier.

The Best Way to Paint Brake Rotors and Restore Brake Rotors

Posted by KBS Coatings on 1/6/2023 to Tips and Tricks

Brake rotors have a big impact on the appearance of wheels. This article describes how to easily restore your rusty brake rotors and how to prevent rust on brake rotors.

Restoring a Wooden Countertop With DiamondFinish Clear

Posted by KBS Coatings on 1/2/2023 to News and Updates

DiamondFinish Clear is the ideal clear coat for wooden countertop restorations. DiamondFinish Clear bites and adheres well to the clear that is already on the countertop. DiamondFinish Clear it is able to take the abuse that comes with being a countertop surface.

How To Stop Rust And Prevent Rust

Posted by KBS Coatings on 12/22/2022 to News and Updates

How you choose to stop rust depends on how effectively you want to stop the rust long-term, the amount of work you want to put into the project, and the quality of the final finish you desire to achieve. The KBS 3-Step System stops rust, is easy to use, and provides a beautiful final finish.

How to Achieve an Incredible Looking Finish When Applying A Moisture Cured Paint

Posted by KBS Coatings on 11/18/2022 to Tips and Tricks

Being patient and taking care to not apply coats too thickly and allowing sufficient dry time between coats allows moisture cured urethanes to cure correctly leaving a beautiful and durable finish. This article describes how to properly apply moisture cured urethanes.

KBS Application Guides

Categories

Recent Posts

Archives