KBS Coatings Is Proudly Made In The USA!
Call: (219) 263-0073
Text: (219) 531-7797
SHIPPING: Under $75, as low as $5 | Over $75, FREE*!
KBS Coatings Accepts Credit Cards, PayPal and Venmo

All KBS Coatings Products for Rust Prevention and Metal Restoration

KBS Coatings, proudly made in the USA, offers a wide range of products including rust prevention, restoration, gas tank sealers, clear coats, high temperature paints, and engine paints. Our team is ready to assist you in choosing the right products for your project and provide application support.

KBS Coatings Product Categories

KBS Tank Sealer System
Prep Products
Rust Prevention
Tank Sealers
Topcoats
Clear Coats
Engine Paints
Undercoatings
High Temperature Coatings
Cavity Wax
Paint and Tank Stripper
Primers
Putty, Fillers, and Patches
Disposable Gloves
Supplies and Accessories
Paint Spray Guns

All KBS Coatings Products

1 2 3 Next Page View All
KBS Klean
KBS Klean
KBS Klean is a concentrated, water-based, biodegradable cleaner and degreaser that removes grease, oil, grime, and road film without leaving residue -- so your paint and coatings bond better and last longer. Safe, non-flammable, and phosphate-free, KBS Klean is the smart alternative to harsh solvents. It's Step 1 in both the KBS 3-Step Rust Prevention System and the KBS 3-Step Tank Sealing System. Try some today and see why customers say...it's not really clean until it's KBS Klean'd!
(122)
More Info ➔
RustBlast
RustBlast
RustBlast is a powerful rust remover, zinc phosphate pre-primer, and metal etch. RustBlast effectively dissolves rust, corrosion, metal oxides, and tarnish from most metal surfaces. RustBlast is ideal for removing rust from chrome surfaces.
(121)
More Info ➔
RustSeal
RustSeal
RustSeal is a single-component, ready-to-use rust encapsulating coating that permanently stops rust and prevents its return. It bonds to clean or lightly rusted metal and cures to a rock-hard, ceramic-like finish that resists road salts, fuel, and most chemicals without cracking, peeling, or chipping. Applied in thin coats with a minimum of two coats recommended, RustSeal delivers long-term rust protection on automotive frames, undercoatings, fuel tanks, trailers, and industrial metalwork.
(456)
More Info ➔
Frame Coater Kit
Frame Coater Kit
The Frame Coater Kit is KBS Coatings' complete 3-step rust prevention system — everything you need to permanently stop rust on a full-size car or truck frame, or any 50 sq. ft. metal surface. Each kit includes KBS Klean (industrial degreaser), RustBlast (rust remover and metal etch), and RustSeal, a moisture-cured coating that chemically bonds to metal and won't crack, chip, or peel. Available in 11 colors with detailed step-by-step instructions included. Factory direct — ships same day.
$72.00
(158)
More Info ➔
Stop Rust Gallon Kit
Stop Rust Gallon Kit
The Stop Rust Gallon Kit is our gallon size 3-Step System Kit that includes enough products to Klean, Blast & Seal any 200 sq. ft. area with 2 coats of paint coverage. You get Top Quality Rust Protection at a tremendous value! Detailed instructions included.
$200.00
(2)
More Info ➔
Stop Rust Quart Kit
Stop Rust Quart Kit
The Stop Rust Quart Kit is an all-inclusive quart size kit that includes enough products to Klean, Blast, and Seal a 50 sq. ft. area with 2 coats of paint coverage and rust protection. Top Ranked Rust Protection at a tremendous value! Detailed instructions included give you professional results.
$72.00
(1)
More Info ➔
Large Frame Coater Kit
Large Frame Coater Kit
The Large Frame Coater Kit is the large 3-Step Rust Prevention Kit includes enough products to Klean, Blast, and Seal the entire underside of your car or truck, or any 100 sq. ft. area with 2 coats of paint coverage. Convenient all-inclusive kit at a tremendous savings!
$126.00
(38)
More Info ➔
Ultimate Frame Coater Kit
Ultimate Frame Coater Kit
Our Ultimate Quart Size 3-Step System kit includes enough products to Klean, Blast & Seal a full-size car or truck frame, or any 50 sq. ft. area with 2 coats of paint coverage AND Cavity Coater and Wand to seal up the inside of the frame. Top Quality Inside-Out protection at a tremendous value!
$110.00 Original price $107.00 Sale
(8)
More Info ➔
All-In-One Chassis Kit
All-In-One Chassis Kit
The All-In-One Chassis Kit takes our popular Frame Coater Kit to the next level. In addition to the complete KBS 3-Step System, this all-inclusive kit includes a pint of BlackTop topcoat for a permanent durable final finish which withstands dulling and fading caused by prolonged sunlight exposure.
$102.00
(61)
More Info ➔
Ultimate All-In-One Chassis Kit
Ultimate All-In-One Chassis Kit
The Ultimate All-In-One Chassis Kit takes our All-In-One Chassis Kit to the next level. In addition to the complete KBS 3-Step Rust Prevention System, this all-inclusive kit includes BlackTop 1K topcoat for a permanent durable finish which does not dull or fade with prolonged sunlight exposure AND also includes Cavity Coater Aerosol plus Cavity Wand for Inside Out Rust Protection.
$135.00
(2)
More Info ➔
All-In-One Kit
All-In-One Kit
This All-Inclusive Kit takes our popular Frame Coater Kit to the next level. In addition to the complete KBS 3-Step System, this kit includes a quart of KBS Top Coater for a permanent final finish which withstands dulling and fading caused by prolonged sunlight exposure.
$117.00
(4)
More Info ➔
Large All-In-One Chassis Kit
Large All-In-One Chassis Kit
This complete kit takes our popular Large Frame Coater Kit to the next level. In addition to the complete KBS 3-Step System, this kit includes a Quart of BlackTop topcoat for a permanent final finish which withstands dulling and fading caused by prolonged sunlight exposure.
$162.00
(9)
More Info ➔
System Sampler Kit
System Sampler Kit
The KBS System Sampler Kit is a complete 3-step rust prevention starter kit that cleans, preps, and permanently coats up to 12.5 sq. ft. of bare or rusted metal. It includes 8oz each of KBS Klean (industrial degreaser), RustBlast (rust remover and metal etch), and RustSeal (moisture-cured rust preventive coating), plus nitrile gloves, two brushes, a stir stick, and step-by-step instructions. Available in 10 colors, RustSeal chemically bonds to metal and won't crack, chip, or peel.
$27.00
(133)
More Info ➔
All-In-One System Sampler Kit
All-In-One System Sampler Kit
This complete All-In-One System Sampler Kit takes our popular System Sampler Kit to the next level. In addition to the complete KBS 3-Step System, this kit includes 8oz of BlackTop topcoat for a permanent final finish which withstands dulling and fading caused by prolonged sunlight exposure.
$60.00
(13)
More Info ➔
Ultimate System Sampler Kit
Ultimate System Sampler Kit
Everything you need to get started and try out our complete KBS system stopping rust from the inside out! A full 1/2 pint of RustSeal will cover an approx. 12 sq. ft. area with 2 coats and the Cavity Coater and Wand will seal up to 125 sq. ft. Experience the quality & durability for yourself. Our complete system in one package!
$63.00
(11)
More Info ➔
Large System Sampler Kit
Large System Sampler Kit
Everything you need to get started & try out our complete KBS system! A full pint of RustSeal will cover an approx. 25 sq. ft. area with 2 coats. Experience the quality & durability for yourself. Our complete KBS system in one package!
$52.00
(13)
More Info ➔
Motorcycle Frame Coater Kit
Motorcycle Frame Coater Kit
This complete Motorcycle Frame Coater Kit takes our popular System Sampler Kit to the next level. In addition to the complete KBS 3-Step System, this kit includes 8oz of BlackTop topcoat for a permanent final finish which withstands dulling and fading caused by prolonged sunlight exposure.
$60.00
(2)
More Info ➔
Large All-In-One Kit
Large All-In-One Kit
This complete kit takes our popular Large Frame Coater Kit to the next level. In addition to the complete KBS 3-Step System, this kit includes a Quart of KBS Top Coater for a permanent final finish which withstands dulling and fading caused by prolonged sunlight exposure.
$162.00
(1)
More Info ➔
DiamondFinish Clear
DiamondFinish Clear
DiamondFinish Clear is a crazy tough Clear Coat that can be applied Direct To Metal or over other coatings. DiamondFinish Clear is a water clear high gloss clear coat that remains permanently flexible and is able to perform in the toughest environments without yellowing, cracking or peeling.
(384)
More Info ➔
DiamondFinish Clear 1K Aerosol
DiamondFinish Clear 1K Aerosol
DiamondFinish Clear 1K Aerosol is a professional-grade, single-component clear coat that sprays direct to ferrous metals, aluminum, and painted surfaces with no primer or heat curing required. UV-stable and rated to 250°F, it reaches 5H pencil hardness after 5 days and resists chemicals, graffiti, yellowing, cracking, and peeling. One can covers up to 35 sq. ft. - get a gun-quality finish without the gun.
$25.00
(46)
More Info ➔
Auto Fuel Tank Sealer Kit
Auto Fuel Tank Sealer Kit
The KBS Auto Fuel Tank Sealer Kit is an all-inclusive 3-step system that cleans, preps, and permanently seals gas tanks up to 25 gallons. The kit includes KBS Klean (degreaser), RustBlast (rust remover and metal etch), Gold Standard Tank Sealer, nitrile gloves, a stir stick, and step-by-step instructions. The sealer eliminates rust and corrosion, seals pinholes and weld seams, and is compatible with modern fuels including ethanol blends.
$77.00
(355)
More Info ➔
Large Cycle Tank Sealer Kit
Large Cycle Tank Sealer Kit
The KBS Large Cycle Tank Sealer Kit is a complete 3-step system that permanently seals fuel tanks up to 12 gallons on motorcycles, generators, lawn mowers, tractors, and snowmobiles. The kit includes KBS Klean (heavy-duty degreaser), RustBlast (rust remover and metal etch), and Gold Standard Tank Sealer, a fuel-impervious coating that eliminates rust and corrosion and seals pinholes and weld seams. Step-by-step instructions are included for professional, long-lasting results.
$55.00
(236)
More Info ➔
Large Cycle Tank Sealer PLUS Kit
Large Cycle Tank Sealer PLUS Kit
The Large Cycle Tank Sealer PLUS Kit is an all-inclusive tank stripping and tank sealing kit that contains everything found in our Large Cycle Tank Sealer Kit, PLUS a quart of KBS Strip to quickly remove any old failing sealers previously used to seal your tank. Detailed instructions included to give you professional and long-lasting results. Satisfaction guaranteed!
$67.00
(34)
More Info ➔
Cycle Tank Sealer Kit
Cycle Tank Sealer Kit
The KBS Cycle Tank Sealer Kit is a complete 3-step system for permanently cleaning, prepping, and sealing fuel tanks up to 5 gallons — including motorcycle, generator, lawn mower, tractor, snowmobile, and utility tanks. Each kit includes KBS Klean (heavy-duty degreaser), RustBlast (rust remover and metal etch), and Gold Standard Tank Sealer, a fuel-impervious coating that permanently seals pinholes and weld seams on steel, aluminum, and fiberglass tanks. Step-by-step instructions are included for professional, long-lasting results.
$50.00
(539)
More Info ➔
Cycle Tank Sealer PLUS Kit
Cycle Tank Sealer PLUS Kit
The Cycle Tank Sealer PLUS Kit is our *PLUS* Kit that contains everything found in our regular Cycle Tank Sealer Kit PLUS a quart of KBS Strip to quickly remove any old failing sealers previously used to seal your tank. Detailed instructions included to give you professional and long-lasting results.
$60.00
(49)
More Info ➔
Tank Sealer Kit for 25-50 Gallon Tanks
Tank Sealer Kit for 25-50 Gallon Tanks
A money-saving 3-Step repair kit which includes enough products to clean, prep & permanently seal up a 25-50 gallon tank. Perfect for RV tanks, tractor tanks, diesel tanks, hold tanks, air compressor tanks, and more. Detailed instructions included. Satisfaction guaranteed!
$140.00
(19)
More Info ➔
Gold Standard Tank Sealer
Gold Standard Tank Sealer
Gold Standard Tank Sealer will stop rust and form a tough, fuel impervious coating while sealing small pinholes and weld seams. Your fuel will never touch the inside walls of your tank again.
(122)
More Info ➔
KBS Plastic Tank Sealer System
KBS Plastic Tank Sealer System
Stop fuel from weeping through your plastic tank for good. The KBS Plastic Tank Sealer System is a complete three-step sealing kit - KBS Klean, Fusion SEP, and Gold Standard Tank Sealer - engineered specifically for hard plastic fuel tanks including HDPE. Works with gasoline, diesel, E10, E15, and E85. Full cure in 4 days. Not for use on flexible plastic containers such as portable gas cans.
(2)
More Info ➔
KBS Tank Sealer System
KBS Tank Sealer System
The KBS Tank Sealer System is a complete 3-step fuel tank restoration kit that permanently seals the interior of metal, aluminum, and fiberglass tanks from 1 to 100 gallons. Each size-matched kit includes KBS Klean (heavy-duty water-based degreaser), RustBlast (rust remover and zinc phosphate metal prep), and Gold Standard Tank Sealer, plus nitrile gloves, a stir stick, and step-by-step instructions. Gold Standard Tank Sealer is non-flammable, contains no MEK, and is impervious to modern fuels including ethanol blends (E10, E15, E85), diesel, and biodiesel.
(34)
More Info ➔
4 Quart RustSeal Special - Convenience Gallon
4 Quart RustSeal Special - Convenience Gallon
The 4 Quart Special features four quarts of RustSeal to maximize savings and avoid waste. The 4 Quart Special is an incredible value for multiple larger size projects. Each RustSeal quart provides 2 coats of coverage for a 50 sq. ft. area. Mix or match colors.
$177.00
(45)
More Info ➔
4PAK - RustSeal Convenience Quart
4PAK - RustSeal Convenience Quart
The KBS 4PAK is a convenience quart of RustSeal rust preventive coating packaged in four individual 8oz cans, so you open only what you need and avoid wasting a full quart. Each 8oz can covers approximately 12 sq. ft. with two coats; all four cans together cover roughly 50 sq. ft. of metal, concrete, or fiberglass. RustSeal chemically bonds to the surface, forms a permanent non-porous barrier against moisture and oxygen, and withstands temperatures up to 600°F.
$80.00
(27)
More Info ➔
KBS Fusion SEP - Self-Etching Primer
KBS Fusion SEP - Self-Etching Primer
Fusion SEP is a fast-drying, all-purpose self-etching primer for direct-to-metal and inter-coat applications. It bonds to bare steel, aluminum, galvanized metal, copper, bronze, chrome, fiberglass, GRP, SMC, polyester filler, and most hard plastics. It is also the preferred inter-coat primer for topcoating over fully cured RustSeal. Ready for a topcoat in just 1 hour. Spray or brush on virtually any painted or bare metal surface.
(27)
More Info ➔
KBS Fusion FPP - Flexible Plastics Primer
KBS Fusion FPP - Flexible Plastics Primer
KBS Fusion FPP - Flexible Plastics Primer is a grey flexible surface primer ideal for promoting adhesion between flexible surfaces like plastics, urethanes, wood, fiberglass, carbon fiber and most varieties of Topcoats. KBS Fusion Flexible Plastics Primer coats fast and easy providing a tight bond for superior paint adhesion and is ideal for hard-to-paint surfaces.
$27.00
(3)
More Info ➔
BlackTop
BlackTop
BlackTop is a single stage, moisture-cured, and UV stable coating. BlackTop is a high-performance protective coating specifically formulated to withstand dulling and fading caused by prolonged sunlight exposure. BlackTop is ideal for topcoating surfaces previously sealed with RustSeal or any other paint/primer application, and BlackTop also excels as a direct to bare metal coating, no primer required.
(102)
More Info ➔
KBS Top Coater
KBS Top Coater
KBS Top Coater is a single-component (1K), 100% UV stable top coat paint that bonds directly to bare steel and aluminum without a primer. Available in quart, gallon, and 5-gallon sizes across 18 colors in gloss and matte finishes; a gallon covers up to 700 sq. ft. in a single coat. It brushes, rolls, or sprays on without running or sagging, resists chemicals, and withstands temperatures up to 300°F.
(14)
More Info ➔
KBS Top Coater 1K Aerosol
KBS Top Coater 1K Aerosol
KBS Top Coater is an aerosol spray paint formulated for maximum coverage and professional looking results. KBS Top Coater is an ideal topcoat paint for RustSeal when the area will be consistently exposed to sunlight. KBS Top Coater is an extremely high solids paint does not run or sag, and gives at least twice the coverage of conventional spray paints.
(25)
More Info ➔
KBS Top Coater 1K Galvanized 12oz Aerosol
KBS Top Coater 1K Galvanized 12oz Aerosol
KBS Top Coater Galvanized Aerosol is a high-solids cold galvanizing spray that applies in minutes from a 12 oz. aerosol can with no mixing and no spray gun required. One can covers up to 30 square feet per coat, more than twice the coverage of conventional aerosol spray paints, with a full cure in 24 hours. Apply directly to clean bare metal for fast standalone protection, or use it as the finish coat over KBS RustSeal for a complete two-stage rust protection system.
$24.00
(1)
More Info ➔
Chrome Spray Paint - KBS Top Coater 1K Aerosol
Chrome Spray Paint - KBS Top Coater 1K Aerosol
KBS Top Coater Chrome Spray Paint is a superior spray paint formulated for maximum coverage and professional looking metallic results. KBS Top Coater Chrome Spray Paint is an ideal exterior paint to refresh a chrome surface or create a chrome look on a surface. KBS Top Coater Chrome Spray Paint is a very high solids paint does not run or sag, and gives at least twice the coverage of conventional spray paints.
$26.00
(1)
More Info ➔
Camo Aerosol 4 Pack - KBS Top Coater
Camo Aerosol 4 Pack - KBS Top Coater
KBS Top Coater Camo 4 Pack is a complete single-component (1K) aerosol camouflage system that includes all four camo colors for a full field-ready finish: Flat Black, Green, Desert Tan, and Brown. Each can uses a high-solids formula that delivers at least twice the coverage of standard rattle cans without running or sagging, and withstands continuous temperatures up to 300°F. UV stable, chemically resistant, and compatible with bare metal, primers, and cured RustSeal, KBS Top Coater Camo dries to touch in approximately 30 minutes.
$75.00
(6)
More Info ➔
Cavity Coater
Cavity Coater
KBS Cavity Coater is a single-step, super-penetrating corrosion inhibiting coating (CIC) formulated specifically for enclosed metal surfaces: door panels, frame rails, rocker panels, and floor seams. Its water-displacing formula creeps into welds and seams to form a self-healing film, delivering rust protection proven to withstand 4,000+ hours of salt spray testing. One application works on bare, painted, or lightly rusted metal -- no stripping required.
(47)
More Info ➔
Reusable Cavity Wand Featuring 360° Spray Tip
Reusable Cavity Wand Featuring 360° Spray Tip
The Reusable Cavity Wand features a durable 360° spray tip to get in to hard-to-reach areas. This Cavity Wand attaches to the Cavity Coater Aerosol Can and is easy to clean and is engineered to require only an 1/8-inch hole eliminating the need to drill new holes.
$14.00
(7)
More Info ➔
Trunk and Floorpan Repair Kit
Trunk and Floorpan Repair Kit
The Trunk and Floorpan Repair Kit is a restoration kit that will save you money versus the cost of replacement. Restore your floor pan, trunk, or pickup truck bed back to new and never deal with rust again! Easy-to-follow detailed instructions included.
$137.00
(30)
More Info ➔
KBS #1 Thinner
KBS #1 Thinner
KBS #1 Thinner is a Low VOC paint thinner used for the thinning and clean up of RustSeal, DiamondFinish Clear, KBS MAXX, BlackTop, KBS Top Coater, Motor Coater and our other KBS Coatings Paints.
(31)
More Info ➔
XTC - Xtreme Temperature Coating
XTC - Xtreme Temperature Coating
XTC is a high temperature/heat resistant coating formulated specifically to protect metal surfaces operating at temperatures from 500° F to 1500° F. With proper preparation, XTC provides outstanding adhesion, film integrity, weathering, and thermal shock-resistance throughout this entire temperature range, and is guaranteed not to burn off! Available in many great colors and clear.
(208)
More Info ➔
XTC Clear
XTC Clear
XTC Clear is a high temperature and heat resistant coating formulated specifically to protect metal surfaces operating at temperatures above 500F. XTC Clear provides outstanding adhesion, film integrity, weathering, and thermal shock-resistance and will not burn off!
(4)
More Info ➔
XTC Zinc Rich Primer
XTC Zinc Rich Primer
XTC Zinc Rich Primer prevents corrosion of metal surfaces exposed to high heat, high humidity, condensation and salt air. XTC Zinc Rich Primer functions much like galvanizing as it locks itself to bare metal surfaces leaving a perfect primed surface for top coating. XTC Zinc Rich Primer can be used alone as a finish paint. XTC Zinc Rich Primer withstands temps in excess of 1200F (648C).
(24)
More Info ➔
Motor Coater Engine Paint
Motor Coater Engine Paint
KBS Motor Coater is a professional-grade, high-heat engine enamel rated to 500°F, available in 40+ OEM-matched automotive and diesel colors for engines, calipers, and underhood components. The self-leveling ceramic resin formula flows out brush marks for a smooth, spray-like finish and resists oil, gasoline, and underhood chemicals. It bonds direct-to-metal on ferrous and non-ferrous metals without a primer and ships factory-direct.
(158)
More Info ➔
Motor Coater Kit
Motor Coater Kit
The Motor Coater Kit has everything needed for a long-lasting paint job including good surface prep and high-quality coatings. You get proper prep, a rust preventative primer, and Motor Coater which is easy to apply, offers superb coverage, and yields a self-leveling professional looking finish brushed or sprayed. The Motor Coater Kit provides a deep, rich pigmented finish for excellent coverage.
(47)
More Info ➔
KBS Strip
KBS Strip
KBS Strip is an aircraft-strength, heavy-duty paint, stain, and varnish remover that sprays as a penetrating semi-gel, clinging to vertical surfaces and cutting through multiple layers of coating in a single application. It removes powder coating, epoxies, lead-based paints, gas tank liners, and most any finish from metal, wood, and masonry. Far more powerful than citrus-based strippers, KBS Strip features an evaporation sealant for very low odor, washes off completely with water, and won't raise wood grain or leave residue. Made in the USA.
(37)
More Info ➔
KBS MAXX
KBS MAXX
KBS MAXX is a two-component (2K), low VOC, single-stage polyurethane topcoat that delivers permanent UV stability, direct-to-metal (DTM) adhesion on ferrous metals and aluminum, and up to 2,000-hour salt spray resistance (ASTM B117) when applied over RustSeal. No primer or additives are required. Apply by brush, roller, or sprayer for automotive, fleet, agricultural, marine, and heavy industrial applications.
(30)
More Info ➔
1 2 3 Next Page View All
Logo