Choosing a Topcoat or Clear Coat for Metal

BlackTop

KBS BlackTop is a single stage, moisture-cured 1K urethane chassis paint that seals frames, trailers, and suspension parts in a permanent, UV stable black finish without a separate clear coat. BlackTop applies by brush, roller, or spray gun over RustSeal, clean bare metal, primed, or previously painted surfaces, and comes in Gloss, OEM Satin, and Flat Black in sizes from aerosol to 5 gallon. BlackTop resists heat to 500F, holds 5H pencil hardness, and passes 2,000 hours of B117 salt spray when applied over two coats of RustSeal.

$27.00

(104)

More Info ➔

KBS MAXX

KBS MAXX is a two-component (2K), low VOC, single-stage polyurethane topcoat that delivers permanent UV stability, direct-to-metal (DTM) adhesion on ferrous metals and aluminum, and up to 2,000-hour salt spray resistance (ASTM B117) when applied over RustSeal. No primer or additives are required. Apply by brush, roller, or sprayer for automotive, fleet, agricultural, marine, and heavy industrial applications.

$68.00

(30)

More Info ➔

KBS Top Coater

KBS Top Coater is a single component (1K), 100% UV stable top coat paint that bonds directly to bare steel and aluminum without a primer. KBS Top Coater is available in quart, gallon and 5 gallon sizes across 17 colors in gloss and matte finishes, and a gallon covers up to 700 sq. ft. in a single coat. KBS Top Coater brushes, rolls or sprays on without running or sagging, resists chemicals, and withstands temperatures up to 300 degrees F.

$54.00

(14)

More Info ➔

KBS Top Coater 1K Aerosol

KBS Top Coater 1K Aerosol is a high-solids, single-component aerosol topcoat that finishes bare metal and RustSeal-coated metal in one product, with no primer, hardener, or spray gun required. A 16oz can covers up to 38 sq. ft. and a 12oz can covers up to 30 sq. ft. in a single coat, at least twice the coverage of a conventional spray can. The formula is 100% UV stable, resists fuels, oils, and road salts, withstands 300F, and comes in 30+ colors including John Deere, Case, Ford, IHC, Caterpillar, and Allis Chalmers OEM matches.

$24.00

(25)

More Info ➔

Chrome Spray Paint - KBS Top Coater 1K Aerosol

KBS Top Coater Chrome Spray Paint is a superior spray paint formulated for maximum coverage and professional looking metallic results. KBS Top Coater Chrome Spray Paint is an ideal exterior paint to refresh a chrome surface or create a chrome look on a surface. KBS Top Coater Chrome Spray Paint is a very high solids paint does not run or sag, and gives at least twice the coverage of conventional spray paints.

$26.00

(1)

More Info ➔

KBS Top Coater 1K Galvanized 12oz Aerosol

KBS Top Coater Galvanized Aerosol is a high-solids cold galvanizing spray that applies in minutes from a 12 oz. aerosol can with no mixing and no spray gun required. One can covers up to 30 square feet per coat, more than twice the coverage of conventional aerosol spray paints, with a full cure in 24 hours. Apply directly to clean bare metal for fast standalone protection, or use it as the finish coat over KBS RustSeal for a complete two-stage rust protection system.

$24.00

(1)

More Info ➔

KBS MAXX Clear

KBS MAXX Clear is a two-component (2K), permanently UV resistant urethane clear coat that bonds direct to ferrous metal, galvanized steel, aluminum, fiberglass, and exterior wood with no primers or additives required. KBS MAXX Clear is the most chemically resistant clear coat KBS makes, rated Excellent against 10% hydrochloric acid, 10% acetic acid, 10% sodium hydroxide, lubricating and cutting oils, and water immersion, and it reaches 2H pencil hardness at 72 hours with 160 inch-pounds of impact resistance and 1,000 hours of QUV 313B UV testing. Available in High Gloss (90 to 95%), Satin (45 to 55%), and Flat (5 to 15%); apply by brush, roller, or spray.

$68.00

(23)

More Info ➔

DiamondFinish Clear

KBS DiamondFinish Clear is a single-component (1K) moisture-cured urethane clear coat that seals bare metal, wood, fiberglass, gelcoat, and cured paint with a water-clear, high-gloss film. DiamondFinish Clear cures to 7H pencil hardness in seven days, recoats in 2 to 4 hours, and covers 400 sq. ft. per gallon at 2 mils. No hardener or activator is needed, the coating is UV stable and will not yellow or chalk, and the cured film resists most common shop chemicals and solvents.

$25.00

(384)

More Info ➔

DiamondFinish Clear 1K Aerosol

KBS DiamondFinish Clear 1K Aerosol is a single-component acrylic clear coat that sprays directly onto ferrous metal, aluminum, and cured painted surfaces with no primer and no heat curing. One can covers up to 35 sq. ft. per coat, dries dust free in 3 to 6 minutes, and reaches 5H pencil hardness after 5 days. Available in Gloss (90 to 95 percent gloss) and Satin (45 to 55 percent gloss), it stays UV stable to 250F without yellowing, cracking, or peeling.

$25.00

(47)

More Info ➔

KBS Bed Renu

KBS Bed Renu is a spray can bed liner coating that restores worn truck bedliner and recoats bumpers, fender flares, and running boards with a textured, UV-stable black finish. One 15 oz. aerosol can covers up to 30 sq. ft., recoats in 1 to 2 hours, and reaches full cure in about 48 hours, with no spray gun, compressor, or mixing required. KBS Bed Renu resists staining from harsh chemicals and stays flexible, so it will not crack, bubble, or peel.

$17.00

(5)

More Info ➔

KBS Bed Liner - Gallon

KBS Bed Liner is a polyurethane protective coating that rolls, brushes, or sprays onto truck beds, trailers, and equipment to seal them against corrosion, abrasion, and impact. One gallon covers up to 250 square feet and cures to a tough, flexible, textured satin black finish that resists UV, chips, and chemicals while adding traction. KBS Bed Liner bonds to metal, aluminum, fiberglass, wood, concrete, asphalt, rubber, and most hard plastics including PVC, and can be painted once fully cured after 72 hours.

$100.00

(4)

More Info ➔

Camo Aerosol 4 Pack - KBS Top Coater

KBS Top Coater Camo 4 Pack is a single-component (1K) aerosol camouflage spray paint kit for metal, wood, and previously painted surfaces, with four cans in Flat Black, Green, Desert Tan, and Brown. The high-solids formula gives at least twice the coverage of conventional spray paints without running or sagging, and the cured finish withstands continuous temperatures up to 300°F. Each color is dry to the touch in about 30 minutes, so you can lay down the next color the same day.

$75.00

(6)

More Info ➔

DiamondFinish Clear - Pint

DiamondFinish Clear is a crazy tough Clear Coat that can be applied Direct To Metal or over other coatings. DiamondFinish Clear is a water clear high gloss clear coat that remains permanently flexible and is able to perform in the toughest environments without yellowing, cracking or peeling. A pint of DiamondFinish Clear should cover 50 sq. ft. single coat coverage.

$44.00

(2)

More Info ➔

DiamondFinish Clear - Quart

DiamondFinish Clear is a crazy tough Clear Coat that can be applied Direct To Metal or over other coatings. DiamondFinish Clear is a water clear high gloss clear coat that remains permanently flexible and is able to perform in the toughest environments without yellowing, cracking or peeling. A quart of DiamondFinish Clear should cover 100 sq. ft. single coat coverage.

$65.00

(6)

More Info ➔

DiamondFinish Clear - Gallon

DiamondFinish Clear is a crazy tough Clear Coat that can be applied Direct To Metal or over other coatings. DiamondFinish Clear is a water clear high gloss clear coat that remains permanently flexible and is able to perform in the toughest environments without yellowing, cracking or peeling. A gallon of DiamondFinish Clear should cover 400 sq. ft. single coat coverage.

$214.00

(2)

More Info ➔

UV Stable Finish Coats: Solid Color and Clear