Undercoating for Wheel Wells, Frames, and Floor Pans

Undercoatings from KBS Coatings

Questions about undercoating? KBS UnderCoat Directions | KBS UnderCoat FAQs

KBS UnderCoat - Solvent-Based Rubberized Undercoating

KBS UnderCoat - Solvent-Based Rubberized Undercoating

KBS UnderCoat is a solvent-based rubberized undercoating that protects wheel wells, frames, gas tanks, and floor pans from rust, road salt, and stone chipping while deadening road noise. It dries to the touch in 60 minutes and reaches full cure in 2 to 4 hours, bonding to bare or painted metal and fiberglass without a separate primer. Available from a 13 dollar aerosol can up to a 55-gallon drum, and sprays, brushes, or rolls on.

$13.00

(22)

KBS UnderCoat Aerosol

KBS UnderCoat Aerosol

KBS UnderCoat Aerosol is a solvent based undercoating in a spray can that seals wheel wells, frames, gas tanks, and floor pans against road salt and moisture while deadening road noise. Choose the Rubberized or Asphalt formula, sold as a single can or a case of 12, and each can covers 16 to 20 square feet. KBS UnderCoat Aerosol dries to the touch in 60 minutes, fully cures in 2 to 4 hours, and needs no spray gun or compressor.

$13.00

(3)

KBS UnderCoat - Solvent-Based Asphalt

KBS UnderCoat - Solvent-Based Asphalt

KBS UnderCoat Solvent Asphalt is a solvent based asphalt undercoating that seals wheel wells, frames, gas tanks, and floor pans against road salt and moisture while reducing road noise and vibration. It dries to the touch in 60 minutes, reaches full cure in 2 to 4 hours, and covers 100 to 120 square feet per gallon. KBS UnderCoat Solvent Asphalt bonds to bare metal, painted surfaces, fiberglass, and cured RustSeal without a separate primer. Choose the rubberized formula if the underside will be painted: asphalt typically bleeds through a topcoat.

$13.00

(15)

KBS UnderCoat - Waterbased Asphalt

KBS UnderCoat - Waterbased Asphalt

KBS UnderCoat Water Based Asphalt is a low VOC, asphalt based undercoating that seals wheel wells, frames, floor pans, and fenders against road salt while deadening road noise and vibration. It sprays, brushes, or rolls on as a matte black film, is dry to the touch in 30 to 60 minutes, and fully cures in 24 hours, in quart, gallon, 5 gallon, and 55 gallon sizes. Not for mufflers or exhaust parts that see direct heat.

$23.00

(3)