KBS Coatings Products | Rust Prevention & Tank Sealer Paints

KBS Klean

KBS Klean is a concentrated, water-based, biodegradable cleaner and degreaser that removes grease, oil, grime, and road film without leaving residue, so paint and coatings bond better and last longer. One gallon dilutes with hot water into 6 to 11 gallons of working solution, and runs in a pressure washer, parts washer, or spray bottle. Non-flammable, phosphate-free, and safe on aluminum at 25:1, KBS Klean is Step 1 in both the KBS 3-Step Rust Prevention System and the KBS 3-Step Tank Sealing System.

(122)

More Info ➔

RustBlast

RustBlast is a water-based rust remover and metal acid etch that dissolves rust, corrosion, metal oxides, and tarnish, then leaves a zinc phosphate base coat for paint adhesion. Keep the surface wet for 30 minutes on smooth metal, 40 to 60 minutes on moderate rust, or 1 to 2 hours on heavy rust, then rinse with water. RustBlast works on steel, cast iron, aluminum, brass, copper, galvanized, chrome, fiberglass, and concrete, and is non-flammable, non-corrosive, and biodegradable.

(121)

More Info ➔

RustSeal

RustSeal is a single-component rust encapsulating coating that permanently stops rust and prevents its return without requiring full rust removal. It includes no separate hardener, cures to a 600°F heat-resistant, chemical-resistant film, and is available in 11 colors from 8oz to 5-gallon pail. RustSeal is compatible with automotive, marine, industrial, and household metal and is formulated to bond over bare or lightly rusted steel, galvanized metal, and fiberglass.

(457)

More Info ➔

Frame Coater Kit

The KBS Frame Coater Kit is a complete 3-step rust prevention system that cleans, etches, and permanently seals a full-size car or truck frame, or any 50 sq. ft. metal surface. It includes KBS Klean, RustBlast, RustSeal, nitrile gloves, brushes, a stir stick, and step-by-step instructions. RustSeal cures to a 600°F heat-resistant, non-porous film available in 11 colors and is compatible with steel, galvanized metal, and fiberglass.

$72.00

(158)

More Info ➔

Stop Rust Gallon Kit

The Stop Rust Gallon Kit is our gallon size 3-Step System Kit that includes enough products to Klean, Blast & Seal any 200 sq. ft. area with 2 coats of paint coverage. You get Top Quality Rust Protection at a tremendous value! Detailed instructions included.

$200.00

(2)

More Info ➔

Stop Rust Quart Kit

The KBS Stop Rust Quart Kit is a complete 3-step rust prevention system that cleans, etches, and permanently seals up to 50 square feet of rusted or bare metal with two coats of RustSeal. The kit includes a quart each of KBS Klean, RustBlast, and RustSeal in your choice of 11 colors, plus nitrile gloves, two brushes, a stir stick, and printed instructions. RustSeal cures to a completely non-porous film that showed zero change after 1,000 hours of salt spray testing and stays flexible enough to survive thermal cycling from -30F to 140F.

$72.00

(2)

More Info ➔

Large Frame Coater Kit

The KBS Large Frame Coater Kit is an all-inclusive 3-step system that cleans, etches, and permanently seals up to 100 square feet of rusted or bare metal with two coats of RustSeal. It includes a quart of KBS Klean, a gallon of RustBlast, two quarts of RustSeal in any of 11 colors, nitrile gloves, two brushes, a stir stick, and printed instructions. RustSeal goes directly over treated rust, cures to a completely non-porous film rated to 500F, and needs no topcoat.

$126.00

(39)

More Info ➔

Ultimate Frame Coater Kit

Our Ultimate Quart Size 3-Step System kit includes enough products to Klean, Blast & Seal a full-size car or truck frame, or any 50 sq. ft. area with 2 coats of paint coverage AND Cavity Coater and Wand to seal up the inside of the frame. Top Quality Inside-Out protection at a tremendous value!

~~$110.00 Original price~~ $107.00 Sale

(8)

More Info ➔

All-In-One Chassis Kit

The KBS All-In-One Chassis Kit is a complete 4-product system that cleans, de-rusts, seals, and topcoats a vehicle chassis or frame, covering roughly 50 square feet. It includes KBS Klean, RustBlast, RustSeal in a choice of 11 colors, a pint of BlackTop topcoat in Gloss Black, OEM Satin Black, or Flat Black, KBS #1 Thinner, brushes, gloves, a stir stick, and instructions. RustSeal forms a non-porous barrier rated to 600 degrees F, and BlackTop supplies the UV-stable finish that keeps an exposed frame from dulling in sunlight.

$102.00

(61)

More Info ➔

Ultimate All-In-One Chassis Kit

The Ultimate All-In-One Chassis Kit takes our All-In-One Chassis Kit to the next level. In addition to the complete KBS 3-Step Rust Prevention System, this all-inclusive kit includes BlackTop 1K topcoat for a permanent durable finish which does not dull or fade with prolonged sunlight exposure AND also includes Cavity Coater Aerosol plus Cavity Wand for Inside Out Rust Protection.

$135.00

(2)

More Info ➔

All-In-One Kit

This All-Inclusive Kit takes our popular Frame Coater Kit to the next level. In addition to the complete KBS 3-Step System, this kit includes a quart of KBS Top Coater for a permanent final finish which withstands dulling and fading caused by prolonged sunlight exposure.

$117.00

(4)

More Info ➔

Large All-In-One Chassis Kit

This complete kit takes our popular Large Frame Coater Kit to the next level. In addition to the complete KBS 3-Step System, this kit includes a Quart of BlackTop topcoat for a permanent final finish which withstands dulling and fading caused by prolonged sunlight exposure.

$162.00

(9)

More Info ➔

System Sampler Kit

The KBS System Sampler Kit is a trial-size version of the KBS 3-Step Rust Prevention System that cleans, preps, and permanently coats up to 12.5 sq. ft. of bare or rusted metal. It includes 8oz each of KBS Klean, RustBlast, and RustSeal in any of 10 colors, plus nitrile gloves, two brushes, a stir stick, and instructions.

$27.00

(133)

More Info ➔

All-In-One System Sampler Kit

This complete All-In-One System Sampler Kit takes our popular System Sampler Kit to the next level. In addition to the complete KBS 3-Step System, this kit includes 8oz of BlackTop topcoat for a permanent final finish which withstands dulling and fading caused by prolonged sunlight exposure.

$60.00

(13)

More Info ➔

Ultimate System Sampler Kit

Everything you need to get started and try out our complete KBS system stopping rust from the inside out! A full 1/2 pint of RustSeal will cover an approx. 12 sq. ft. area with 2 coats and the Cavity Coater and Wand will seal up to 125 sq. ft. Experience the quality & durability for yourself. Our complete system in one package!

$63.00

(11)

More Info ➔

Large System Sampler Kit

Everything you need to get started & try out our complete KBS system! A full pint of RustSeal will cover an approx. 25 sq. ft. area with 2 coats. Experience the quality & durability for yourself. Our complete KBS system in one package!

$52.00

(13)

More Info ➔

Motorcycle Frame Coater Kit

This complete Motorcycle Frame Coater Kit takes our popular System Sampler Kit to the next level. In addition to the complete KBS 3-Step System, this kit includes 8oz of BlackTop topcoat for a permanent final finish which withstands dulling and fading caused by prolonged sunlight exposure.

$60.00

(2)

More Info ➔

Large All-In-One Kit

This complete kit takes our popular Large Frame Coater Kit to the next level. In addition to the complete KBS 3-Step System, this kit includes a Quart of KBS Top Coater for a permanent final finish which withstands dulling and fading caused by prolonged sunlight exposure.

$162.00

(1)

More Info ➔

DiamondFinish Clear

KBS DiamondFinish Clear is a single-component (1K) moisture-cured urethane clear coat that seals bare metal, wood, fiberglass, gelcoat, and cured paint with a water-clear, high-gloss film. DiamondFinish Clear cures to 7H pencil hardness in seven days, recoats in 2 to 4 hours, and covers 400 sq. ft. per gallon at 2 mils. No hardener or activator is needed, the coating is UV stable and will not yellow or chalk, and the cured film resists most common shop chemicals and solvents.

(384)

More Info ➔

DiamondFinish Clear 1K Aerosol

KBS DiamondFinish Clear 1K Aerosol is a single-component acrylic clear coat that sprays directly onto ferrous metal, aluminum, and cured painted surfaces with no primer and no heat curing. One can covers up to 35 sq. ft. per coat, dries dust free in 3 to 6 minutes, and reaches 5H pencil hardness after 5 days. Available in Gloss (90 to 95 percent gloss) and Satin (45 to 55 percent gloss), it stays UV stable to 250F without yellowing, cracking, or peeling.

$25.00

(46)

More Info ➔

Auto Fuel Tank Sealer Kit

The KBS Auto Fuel Tank Sealer Kit is an all-inclusive 3-step system that cleans, preps, and permanently seals gas tanks up to 25 gallons. The kit includes KBS Klean (degreaser), RustBlast (rust remover and metal etch), Gold Standard Tank Sealer, nitrile gloves, a stir stick, and step-by-step instructions. The sealer eliminates rust and corrosion, seals pinholes and weld seams, and is compatible with modern fuels including ethanol blends.

$77.00

(355)

More Info ➔

Large Cycle Tank Sealer Kit

The KBS Large Cycle Tank Sealer Kit is a complete 3-step system that permanently seals fuel tanks up to 12 gallons on motorcycles, generators, lawn mowers, tractors, and snowmobiles. The kit includes KBS Klean (heavy-duty degreaser), RustBlast (rust remover and metal etch), and Gold Standard Tank Sealer, a fuel-impervious coating that eliminates rust and corrosion and seals pinholes and weld seams. Step-by-step instructions are included for professional, long-lasting results.

$55.00

(236)

More Info ➔

Large Cycle Tank Sealer PLUS Kit

The Large Cycle Tank Sealer PLUS Kit is an all-inclusive tank stripping and tank sealing kit that contains everything found in our Large Cycle Tank Sealer Kit, PLUS a quart of KBS Strip to quickly remove any old failing sealers previously used to seal your tank. Detailed instructions included to give you professional and long-lasting results. Satisfaction guaranteed!

$67.00

(34)

More Info ➔

Cycle Tank Sealer Kit

The KBS Cycle Tank Sealer Kit is a complete 3-step system that cleans, preps, and permanently seals fuel tanks up to 5 gallons, including motorcycle, generator, lawn mower, tractor, snowmobile, and utility tanks. It includes KBS Klean, RustBlast, Gold Standard Tank Sealer, nitrile gloves, and a stir stick. The coating resists all fuels and alcohol additives, withstands operating temperatures up to 600 degrees F, and permanently seals pinholes and weld seams on steel, aluminum, and fiberglass tanks.

$50.00

(540)

More Info ➔

Cycle Tank Sealer PLUS Kit

The Cycle Tank Sealer PLUS Kit is our *PLUS* Kit that contains everything found in our regular Cycle Tank Sealer Kit PLUS a quart of KBS Strip to quickly remove any old failing sealers previously used to seal your tank. Detailed instructions included to give you professional and long-lasting results.

$60.00

(49)

More Info ➔

Tank Sealer Kit for 25-50 Gallon Tanks

The KBS 25-50 Gallon Tank Sealer Kit is a complete 3-step system that cleans, preps, and permanently seals fuel tanks holding 25 to 50 gallons. Each kit includes a gallon of KBS Klean, a gallon of RustBlast, two quarts of Gold Standard Tank Sealer, nitrile gloves, a stir stick, and step-by-step instructions. Gold Standard Tank Sealer is impervious to gasoline, diesel, and ethanol-blended fuels, seals pinholes and weld seams, and bonds to steel, aluminum, and fiberglass tanks.

$140.00

(19)

More Info ➔

Gold Standard Tank Sealer

KBS Gold Standard Tank Sealer is a single-component, ready-to-use, moisture-cured urethane coating that permanently seals the inside of steel, aluminum, and fiberglass fuel tanks. One pour-coat-and-drain application stops rust, seals pinholes and weld seams, and cures fuel-proof in 96 hours. The flexible seal is impervious to gasoline, ethanol blends, diesel, and most solvents, withstands 600 degrees F, and is the third step of the KBS 3-Step System with KBS Klean and RustBlast.

(122)

More Info ➔

KBS Plastic Tank Sealer System

The KBS Plastic Tank Sealer System is a three-step kit that cleans, preps, and permanently seals hard plastic fuel tanks including HDPE, so fuel stops weeping through the tank walls. Each kit includes KBS Klean, Fusion SEP plastic primer etch, Gold Standard Tank Sealer, nitrile gloves, a stir stick, and step-by-step instructions. IMPORTANT: inspect your tank first and patch any holes or cracks with NuMetal Epoxy Putty or KBS Patch before sealing. Not for flexible plastic containers such as portable gas cans.

(4)

More Info ➔

KBS Tank Sealer System

The KBS Tank Sealer System is a complete 3-step fuel tank restoration kit that permanently seals the interior of metal, aluminum, and fiberglass tanks from 1 to 100 gallons. Each size-matched kit includes KBS Klean (heavy-duty water-based degreaser), RustBlast (rust remover and zinc phosphate metal prep), and Gold Standard Tank Sealer, plus nitrile gloves, a stir stick, and step-by-step instructions. Gold Standard Tank Sealer is non-flammable, contains no MEK, and is impervious to modern fuels including ethanol blends (E10, E15, E85), diesel, and biodiesel.

(35)

More Info ➔

4 Quart RustSeal Special - Convenience Gallon

The 4 Quart Special features four quarts of RustSeal to maximize savings and avoid waste. The 4 Quart Special is an incredible value for multiple larger size projects. Each RustSeal quart provides 2 coats of coverage for a 50 sq. ft. area. Mix or match colors.

$177.00

(45)

More Info ➔

4PAK - RustSeal Convenience Quart

The KBS 4PAK is a convenience quart of RustSeal rust preventive coating packaged in four individual 8oz cans, so you open only what you need and avoid wasting a full quart. Each 8oz can covers approximately 12 sq. ft. with two coats; all four cans together cover roughly 50 sq. ft. of metal, concrete, or fiberglass. RustSeal chemically bonds to the surface, forms a permanent non-porous barrier against moisture and oxygen, and withstands temperatures up to 600°F.

$80.00

(27)

More Info ➔

KBS Fusion SEP - Self-Etching Primer

Fusion SEP is a fast-drying, all-purpose self-etching primer for direct-to-metal and inter-coat applications. It bonds to bare steel, aluminum, galvanized metal, copper, bronze, chrome, fiberglass, GRP, SMC, polyester filler, and most hard plastics. It is also the preferred inter-coat primer for topcoating over fully cured RustSeal. Ready for a topcoat in just 1 hour. Spray or brush on virtually any painted or bare metal surface.

(27)

More Info ➔

KBS Fusion FPP - Flexible Plastics Primer

KBS Fusion FPP - Flexible Plastics Primer is a grey flexible surface primer ideal for promoting adhesion between flexible surfaces like plastics, urethanes, wood, fiberglass, carbon fiber and most varieties of Topcoats. KBS Fusion Flexible Plastics Primer coats fast and easy providing a tight bond for superior paint adhesion and is ideal for hard-to-paint surfaces.

$27.00

(3)

More Info ➔

BlackTop

KBS BlackTop is a single stage, moisture cured 1K urethane topcoat that seals chassis, frames, trailers, and suspension parts in a permanent black finish without a separate clear coat. BlackTop applies by brush, roller, or spray gun directly to bare metal, primed, or previously painted surfaces, and comes in Gloss, OEM Satin, and Flat Black in sizes from aerosol to 5 gallon. BlackTop resists heat to 500F, holds 5H pencil hardness, and passes 2,000 hours of B117 salt spray when applied over two coats of RustSeal.

(103)

More Info ➔

KBS Top Coater

KBS Top Coater is a single component (1K), 100% UV stable top coat paint that bonds directly to bare steel and aluminum without a primer. KBS Top Coater is available in quart, gallon and 5 gallon sizes across 17 colors in gloss and matte finishes, and a gallon covers up to 700 sq. ft. in a single coat. KBS Top Coater brushes, rolls or sprays on without running or sagging, resists chemicals, and withstands temperatures up to 300 degrees F.

(14)

More Info ➔

KBS Top Coater 1K Aerosol

KBS Top Coater 1K Aerosol is a high-solids, single-component aerosol topcoat that finishes bare metal and RustSeal-coated metal in one product, with no primer, hardener, or spray gun required. A 16oz can covers up to 38 sq. ft. and a 12oz can covers up to 30 sq. ft. in a single coat, at least twice the coverage of a conventional spray can. The formula is 100% UV stable, resists fuels, oils, and road salts, withstands 300F, and comes in 30+ colors including John Deere, Case, Ford, IHC, Caterpillar, and Allis Chalmers OEM matches.

(25)

More Info ➔

KBS Top Coater 1K Galvanized 12oz Aerosol

KBS Top Coater Galvanized Aerosol is a high-solids cold galvanizing spray that applies in minutes from a 12 oz. aerosol can with no mixing and no spray gun required. One can covers up to 30 square feet per coat, more than twice the coverage of conventional aerosol spray paints, with a full cure in 24 hours. Apply directly to clean bare metal for fast standalone protection, or use it as the finish coat over KBS RustSeal for a complete two-stage rust protection system.

$24.00

(1)

More Info ➔

Chrome Spray Paint - KBS Top Coater 1K Aerosol

KBS Top Coater Chrome Spray Paint is a superior spray paint formulated for maximum coverage and professional looking metallic results. KBS Top Coater Chrome Spray Paint is an ideal exterior paint to refresh a chrome surface or create a chrome look on a surface. KBS Top Coater Chrome Spray Paint is a very high solids paint does not run or sag, and gives at least twice the coverage of conventional spray paints.

$26.00

(1)

More Info ➔

Camo Aerosol 4 Pack - KBS Top Coater

KBS Top Coater Camo 4 Pack is a complete single-component (1K) aerosol camouflage system that includes all four camo colors for a full field-ready finish: Flat Black, Green, Desert Tan, and Brown. Each can uses a high-solids formula that delivers at least twice the coverage of standard rattle cans without running or sagging, and withstands continuous temperatures up to 300°F. UV stable, chemically resistant, and compatible with bare metal, primers, and cured RustSeal, KBS Top Coater Camo dries to touch in approximately 30 minutes.

$75.00

(6)

More Info ➔

Cavity Coater

KBS Cavity Coater is a single-step, super-penetrating corrosion inhibiting coating (CIC) built for enclosed metal: door panels, frame rails, rocker panels, and floor seams. The water-displacing formula creeps into welds and seams and cures to a self-healing film rated for over 4,000 hours of ASTM B-117 salt spray testing. Cavity Coater goes over bare, painted, or lightly rusted metal with no stripping required, and will not crack or flake down to -60F.

(47)

More Info ➔

Reusable Cavity Wand Featuring 360° Spray Tip

The Reusable Cavity Wand features a durable 360° spray tip to get in to hard-to-reach areas. This Cavity Wand attaches to the Cavity Coater Aerosol Can and is easy to clean and is engineered to require only an 1/8-inch hole eliminating the need to drill new holes.

$14.00

(7)

More Info ➔

Trunk and Floorpan Repair Kit

The Trunk and Floorpan Repair Kit is a restoration kit that will save you money versus the cost of replacement. Restore your floor pan, trunk, or pickup truck bed back to new and never deal with rust again! Easy-to-follow detailed instructions included.

$137.00

(30)

More Info ➔

KBS #1 Thinner

KBS #1 Thinner is a Low VOC paint thinner used for the thinning and clean up of RustSeal, DiamondFinish Clear, KBS MAXX, BlackTop, KBS Top Coater, Motor Coater and our other KBS Coatings Paints.

(31)

More Info ➔

XTC - Xtreme Temperature Coating

The KBS XTC Xtreme Temperature Coating is a silicone-based high temperature paint that protects metal surfaces operating between 500°F and 1500°F and is guaranteed not to burn off. XTC applies by brush, roll, or spray in 12 colors plus clear, dries to the touch in about 25 minutes, and heat cures at 350°F in 20 to 30 minutes. It resists thermal shock, UV, and weathering on headers, exhaust manifolds, wood stoves, BBQ grills, and smokers, with rust protection when paired with zinc-rich XTC Primer.

(208)

More Info ➔

XTC Clear

KBS XTC Clear is a high temperature silicone clear coat that protects metal surfaces operating above 500°F, withstanding continuous service up to 1200°F without burning off. It is UV stable, resists scratching once heat cured, and adds gloss over other XTC colors on headers, grills, smokers, and stoves. Available in Aerosol, 8oz, Pint, Quart, Gallon, and 5-Gallon Pail sizes.

(4)

More Info ➔

XTC Zinc Rich Primer

XTC Zinc Rich Primer is a zinc-rich, single-component high-temperature primer that protects bare steel from corrosion at continuous operating temperatures up to 1200F (648C). XTC Zinc Rich Primer works like galvanizing: the zinc in the film sacrifices itself to protect the steel underneath, which stops rusting and rust streaking on parts exposed to heat, humidity, condensation, and salt air. XTC Zinc Rich Primer is available in matte grey in six sizes from aerosol to 5 gallon pail, applies by spray, brush, or roller, and can be left as the finish coat or top coated with XTC for a 1500F system rating.

(24)

More Info ➔

Motor Coater Engine Paint

KBS Motor Coater is a professional-grade, high-heat engine enamel rated to 500°F, available in 42 OEM-matched automotive and diesel colors for engines, calipers, and underhood components. The self-leveling ceramic resin formula flows out brush marks for a smooth, spray-like finish and resists oil, gasoline, and underhood chemicals. It bonds direct-to-metal on ferrous and non-ferrous metals without a primer and ships factory-direct.

(159)

More Info ➔

Motor Coater Kit

The KBS Motor Coater Kit is a complete 3 step engine paint kit that degreases, acid etches and then permanently coats an engine block, brake calipers or a transmission case. The kit includes a quart of KBS Klean, a quart of RustBlast, Motor Coater in a pint, quart or aerosol in any of 42 OEM matched colors (the diesel colors are supplied as quarts), 8oz of KBS #1 Thinner, nitrile gloves, a brush, a stir stick and printed instructions. Motor Coater bonds direct to cast iron and aluminum with no primer, resists oil, gasoline and transmission fluid, and holds up to 500 degrees F of intermittent underhood heat.

(48)

More Info ➔

KBS Strip

KBS Strip is an aircraft-strength, heavy-duty paint, stain, and varnish remover that sprays as a penetrating semi-gel, clinging to vertical surfaces and cutting through multiple layers of coating in a single application. It removes powder coating, epoxies, lead-based paints, gas tank liners, and most any finish from metal, wood, and masonry. Far more powerful than citrus-based strippers, KBS Strip features an evaporation sealant for very low odor, washes off completely with water, and won't raise wood grain or leave residue. Made in the USA.

(37)

More Info ➔

KBS MAXX

KBS MAXX is a two-component (2K), low VOC, single-stage polyurethane topcoat that delivers permanent UV stability, direct-to-metal (DTM) adhesion on ferrous metals and aluminum, and up to 2,000-hour salt spray resistance (ASTM B117) when applied over RustSeal. No primer or additives are required. Apply by brush, roller, or sprayer for automotive, fleet, agricultural, marine, and heavy industrial applications.

(30)

More Info ➔

All KBS Coatings Products for Rust Prevention and Metal Restoration

KBS Coatings Product Categories

All KBS Coatings Products