1.4mm Needle, Fluid Nozzle, and Air Cap Set - Fits KBS HVLP Spray Gun

Name: 1.4mm Needle, Fluid Nozzle, and Air Cap Set - Fits KBS HVLP Spray Gun
Brand: KBS Coatings
SKU: 140091
Rating: 5.0 (1 reviews)

1 Reviews +Write a Review

Designed specifically for the KBS HVLP Spray Gun. The 1.4mm tip set up is ideal for use with base coats, clear coats, single stage, primers and other light to medium and some heavier viscosity paint coating materials.

Availability:

On sale ~~$20.00~~ $17.00

Retail Price:$25.00

Your Savings:$8.00(32%)

Quantity

Factory Direct. Ships Same Day!

Details
Customer Reviews

1.4mm Needle, Fluid Nozzle, and Air Cap Set Overview

Designed specifically for the KBS HVLP Spray Gun.

The 1.4mm tip set up is ideal for use with base coats, clear coats, single stage, primers and other light to medium and some heavier viscosity paint coating materials. The 1.4 mm is a very universal tip size.

Allows you to buy a single KBS HVLP Spray Gun and then have multiple spray tip sizes.

Professional results at a fraction of the cost!

1.4mm Needle, Fluid Nozzle, and Air Cap Set Features

High Quality Stainless Steel Nozzle and Needle
Coatings are fully atomized with the ideal fan pattern so that they lay down perfectly giving you a clean even finish.
Excellent Spraying Efficiency
High Efficiency - Above 65% Transfer
Consistent Atomization
Large Fan Pattern
Spray a Full Range of Coatings Water and Solvent Based

Shop 1.4mm Needle, Fluid Nozzle, and Air Cap Set Only - Fits KBS HVLP Spray Gun

Rating Snapshot

Select a row below to filter reviews.

Average Customer Ratings

5.0

Reviews Sorting

Works Great

I bought the HVP Gun with the larger tip for my 2K primers but I needed a 1.4 for RustSeal. This was a great value and works perfect.

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: Amorph from Athens, GA on 2/25/2022

DiamondFinish Clear

KBS DiamondFinish Clear is a single-component (1K) moisture-cured urethane clear coat that seals bare metal, wood, fiberglass, gelcoat, and cured paint with a water-clear, high-gloss film. DiamondFinish Clear cures to 7H pencil hardness in seven days, recoats in 2 to 4 hours, and covers 400 sq. ft. per gallon at 2 mils. No hardener or activator is needed, the coating is UV stable and will not yellow or chalk, and the cured film resists most common shop chemicals and solvents.

$25.00

(384)

More Info ➔

RustSeal

RustSeal is a single-component rust encapsulating coating that permanently stops rust and prevents its return without requiring full rust removal. It includes no separate hardener, cures to a 600°F heat-resistant, chemical-resistant film, and is available in 11 colors from 8oz to 5-gallon pail. RustSeal is compatible with automotive, marine, industrial, and household metal and is formulated to bond over bare or lightly rusted steel, galvanized metal, and fiberglass.

$22.00

(459)

More Info ➔

KBS MAXX

KBS MAXX is a two-component (2K), low VOC, single-stage polyurethane topcoat that delivers permanent UV stability, direct-to-metal (DTM) adhesion on ferrous metals and aluminum, and up to 2,000-hour salt spray resistance (ASTM B117) when applied over RustSeal. No primer or additives are required. Apply by brush, roller, or sprayer for automotive, fleet, agricultural, marine, and heavy industrial applications.

$68.00

(30)

More Info ➔

KBS MAXX Clear

KBS MAXX Clear is a two-component (2K), permanently UV resistant urethane clear coat that bonds direct to ferrous metal, galvanized steel, aluminum, fiberglass, and exterior wood with no primers or additives required. KBS MAXX Clear is the most chemically resistant clear coat KBS makes, rated Excellent against 10% hydrochloric acid, 10% acetic acid, 10% sodium hydroxide, lubricating and cutting oils, and water immersion, and it reaches 2H pencil hardness at 72 hours with 160 inch-pounds of impact resistance and 1,000 hours of QUV 313B UV testing. Available in High Gloss (90 to 95%), Satin (45 to 55%), and Flat (5 to 15%); apply by brush, roller, or spray.

$68.00

(23)

More Info ➔

XTC - Xtreme Temperature Coating

The KBS XTC Xtreme Temperature Coating is a silicone-based high temperature paint that protects metal surfaces operating between 500°F and 1500°F and is guaranteed not to burn off. XTC applies by brush, roll, or spray in 12 colors plus clear, dries to the touch in about 25 minutes, and heat cures at 350°F in 20 to 30 minutes. It resists thermal shock, UV, and weathering on headers, exhaust manifolds, wood stoves, BBQ grills, and smokers, with rust protection when paired with zinc-rich XTC Primer.

$24.00

(208)

More Info ➔

KBS Top Coater

KBS Top Coater is a single component (1K), 100% UV stable top coat paint that bonds directly to bare steel and aluminum without a primer. KBS Top Coater is available in quart, gallon and 5 gallon sizes across 17 colors in gloss and matte finishes, and a gallon covers up to 700 sq. ft. in a single coat. KBS Top Coater brushes, rolls or sprays on without running or sagging, resists chemicals, and withstands temperatures up to 300 degrees F.

$54.00

(14)

More Info ➔

SemperForce Black Nitrile Gloves

SemperForce black nitrile examination gloves are designed for demanding work environments where your safety and comfort are a must. A textured surface promises secure gripping capabilities. SemperForce black nitrile gloves are ideal for automotive, industrial, tattoo, and cosmetology applications.

$12.00

(22)

More Info ➔

KBS #1 Thinner

KBS #1 Thinner is a Low VOC paint thinner used for the thinning and clean up of RustSeal, DiamondFinish Clear, KBS MAXX, BlackTop, KBS Top Coater, Motor Coater and our other KBS Coatings Paints.

$10.00

(31)

More Info ➔

1.4mm Needle, Fluid Nozzle, and Air Cap Set - Fits KBS HVLP Spray Gun

1.4mm Needle, Fluid Nozzle, and Air Cap Set Overview

1.4mm Needle, Fluid Nozzle, and Air Cap Set Features

Rating Snapshot

Average Customer Ratings

Customers Also Bought...